ISDNAUDIO.COM Discussion and help forum - Talkback using Audio TX Communicator

May 7^th, 2024 at 5:52pm

	Welcome, Guest. Please Login or Register
	YaBB is sponsored by XIMinc!

Home

Our Website

Help

ISDNAUDIO.COM Discussion and help forum › General › Techical support › Talkback using Audio TX Communicator

(Moderators: Mo-ISDNAUDIO.COM, Edwin van den Oosterkamp)

‹ Previous Topic | Next Topic ›

Pages: 1

Talkback using Audio TX Communicator (Read 7990 times)

Jul 29^th, 2004 at 4:55pm

Tom Walsh Guest

I am setting up an ISDN connection to record voice over artists using Audio TX Communicator. How do I communicate with the VO artist? Do I simply plug a call centre style head set into my PC (via the soundcard obviously) and speak/listen through that or is other hardware/software required. Also, do ISDN cards have a mic input and aswell as a headphone output so that you can communicate with the VO artist?
Thanks, Tom.

IP Logged

Reply #1 - Jul 30^th, 2004 at 4:01pm

Mo-ISDNAUDIO.COM Offline
YaBB Moderator

Posts: 5

All ISDN codecs (including the Communicator system) are bi-directional. So they send your voice (from the audio input) to the remote studio, and receive the talkback from the remote studio (which appears at the audio output).

As a professional V/O, to use Communicator (which is a very good choice - we spec almost all V/O studios with this system nowadays), you will need:

1. AudioTX Communicator on a Windows 2000 or XP PC
2. A professional quality Mic & Headphones
3. Either a professional grade mic-preamp & headphone amp (the option we supply in packages) or a small mixing desk with a clean-feed capability
4. An ISDN line (obviously!)

We can help with all of this... and professional installation if you wish.

Best,

Mo

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page